Thermo Scientific Evolution 200 Series User Manual page 449

Configuring a Target Temperature
Thermo Scientific
Operation
To configure a target temperature
1. Select Start measurement at target temperature.
2. Enter the Target temperature and Tolerance in °C.
• For a temperature probe.
To start the measurement when the probe reaches the target temperature, set Start on
to Probe temperature and then select the Probe channel. The number of channels
in the list box will match the available ports on the temperature probe interface box.
The probe channel, current temperature and target range appear during the
measurement.
• For a temperature-controlled accessory.
To start the measurement when the cell block reaches the target temperature, set
Start on to Block temperature.
Only the current temperature and target range appear during the measurement.
The Start button is disabled since the measurement is configured to start automatically at
the target temperature.
3. To allow time for equilibration, select Wait for equilibration and enter the duration.
The remaining equilibration time is displayed during the measurement.
Temperature Probe
Evolution 200 Series User Guide
29
435