Thermo Scientific Evolution 200 Series User Manual page 371

Operation
Thermo Scientific
Locking screw
2. Lift the cell holder off the base.
To install the cell holder
1. Line up the cell holder with the two alignment pins on the cell changer base.
2. Hand tighten the two locking screws.
3. Initialize the accessory. See
Related Topics
Installing a Smart Cell Changer
Installation
Contents
• Calibrating the Cell Changer
• Initializing the Cell Changer
• Cell Changer Settings
• Measuring Samples with the Cell Changer
• Displaying the Cell Changer Status Monitor
Related Topics
Safety Considerations
Operating Precautions
Initializing the Cell Changer.
Smart Linear 8-Cell Changer
Cell holder
Locking screw
Base
Evolution 200 Series User Guide
25
357