Adding, Subtracting, Multiplying Or Dividing Scan Data By A Factor - Thermo Scientific Evolution 200 Series User Manual

Adding, Subtracting, Multiplying or Dividing Scan Data by a Factor

Thermo Scientific
Note To use the result in another Average operation, use Workbook or Temporary
to add it to the list (see step 4), click Add to make it an operand, and continue with
step 2.
Perform the operation as explained in the appropriate related topic below.
To return to the previous window, click Back.
To perform additional math operations, repeat this step.
4. To save the result in the current workbook, click Workbook and name the spectrum
when prompted.
The data is added to the list and is available for operations.
To add the result to the list without saving it, click Temporary. Asterisks at the beginning
of a spectrum name indicate the data is not saved.
5. Click Close to close each displayed math window.
Related Topics
Smoothing Scan Data
Converting Scan Data to a Derivative
Converting Scan Data to Other Units
Adding Two Scan Spectra
Normalizing Scan Data
Subtracting a Scan Spectrum
Ratioing Two Scan Spectra
Adding, Subtracting, Multiplying or Dividing Scan Data by a Factor
Finding Peaks in Scan Data
Finding Value Level Crossings in Scan Data
Use Factor in the Math menu to add a constant to the Y value of scan data, subtract a
constant, multiply by a constant or divide by a constant.
To use Factor
1. Choose Math (menu) > Factor.
2
INSIGHT Software
Operation
Evolution 200 Series User Guide 89