Follow these steps to configure the NQA server:
To do...
Enter system view
Enable the NQA server
Configure the listening service
Enabling the NQA client
Configurations on the NQA client take effect only when the NQA client is enabled.
Follow these steps to enable the NQA client:
To do...
Enter system view
Enable the NQA client
Creating an NQA test group
Create an NQA test group before you configure NQA tests.
Follow theses steps to create an NQA test group:
To do...
Enter system view
Create an NQA test group, and
enter the NQA test group view
Configuring an NQA test group
Configuring ICMP echo tests
ICMP echo tests of an NQA test group are used to test reachability of a destination host according to the
ICMP echo response information. An ICMP echo test has the same function as the ping command but
Use the command...
system-view
nqa server enable
nqa server { tcp-connect |
udp-echo } ip-address
port-number
Use the command...
system-view
nqa agent enable
Use the command...
system-view
nqa entry admin-name
operation-tag
12
Remarks
—
Required
Disabled by default.
Required
The destination IP address and port
number must be the same as those
configured on the NQA client. A
listening service must be unique on
the NQA server.
Remarks
—
Optional
Enabled by default.
Remarks
—
Required
In the NQA test group view, you
can specify the test type
You can use the nqa entry
command to enter the test type
view of an NQA test group with
test type configured.