ABB IRB 6650S Product Manual page 327

18
19
20
21
22
Product manual - IRB 6650S
3HAC020993-001 Revision: AG
Action
Foundry Plus
Make sure that the gasket is undamaged. Also
the small gasket fitted in the cover recess.
Replace if damaged.
Foundry Plus
Make sure the washers are fitted in the gasket
holes. Refit the cover, wrist unit Foundry Plus.
Refill the gear with oil.
Re-calibrate the robot.
DANGER
Make sure all safety requirements are met
when performing the first test run.
© Copyright 2004-2022 ABB. All rights reserved.
4.6.5 Replacement of motor, axis 5
Note
xx1400002579
xx1400002580
Detailed in the section Changing oil,
axis-5 gearbox on page 165.
Pendulum Calibration is described in
Operating manual - Calibration Pendu-
lum, enclosed with the calibration tools.
Axis Calibration is described in
rating with Axis Calibration method on
page 379.
General calibration information is in-
cluded in section Calibration on
page 367.
4 Repair
Continued
Calib-
327