Tape Drive Installation; Introduction; Model Identification; Operating Environment - Qualstar 34XX Series User Manual

1.
1.1

Introduction

This guide provides installation instructions and techniques for operating the
Qualstar Model 34XX Series tape drive.
Figure 1-1 The Qualstar 34XX Series Tape Drive
1.2

Model identification

Figure 1-2 identifies the various 34XX models. This User's Guide applies to all
models; the installation and operation of the different models is basically the same.
Differences among models are noted where required; from an operator's point of
view, all models function similarly.
1.3

Operating Environment

The tape drive is designed to operate in an environment between 40° F to 104° F
(4.4° C to 40° C), 20% to 85% relative humidity, and at altitudes from 0 to +8000
feet. Moisture must not be allowed to condense inside the drive or in the tape path
area. Note that the humidity and temperature specifications of the drive exceed that
of most media.
500300 Rev. U

Tape Drive Installation

Tape Drive Installation 1-1