Mitsubishi Electric MELDAS 60 Series Parameter Manual page 166

# Items
1265 ext01 Command
(PR) (bit0) format 1
ext01 Command
(bit1) format 2
ext01 Command
(bit2) format 3
1266 ext02
(PR)
1267 ext03 G code type
(PR) (bit0)
1268 ext04
(PR)
1269 ext05
(PR)
1270 ext06 Handle C axis
(PR) (bit7) coordinate
during cylindrical
interpolation
1271 ext07 Mirror image
(PR) (bit0) operation
5. Base Specifications Parameters
(SETUP PARAM 1. 9/15)
Details
Select the command format for the fixed cycle for
compound lathe.
0: Conventional format
1: MELDAS special format
(1 block command method)
Select the command format for the lathe fixed cycle.
0: Conventional format
1: MELDAS special format
Select the command format for the hole drilling
fixed cycle.
0: Conventional format
1: MELDAS special format
Not used.
Select the high-speed high-accuracy G code type.
0: Conventional format
1: F format
Not used.
Not used.
Specify whether the rotary axis coordinate before
the cylindrical interpolation start command is issued
is kept during the cylindrical interpolation or not.
0: Do not keep
1: keep
Select the type of mirror image operation.
(Applicable only to M65 and M66)
0: Type 1
- The program mirror image, external mirror
image, and parameter mirror image are
exclusive to each other.
- An increment command moves the image to
the position indicated by the move amount with
the sign inverted.
1: Type 2
- Mirror image operation is enabled when the
program mirror image (G51.1) command is
issued or when the external signal or
parameter is ON.
- An increment command moves the image to
the position determined by applying the mirror
image to the absolute program coordinates.
II - 70
Setting range (unit)
0/1
0/1
0/1
0/1
0/1
0/1
(Default: 0)