Mitsubishi Electric MELDAS 60 Series Parameter Manual page 109

# Item
8210 OT INSIDE
8211 MIRR. IMAGE
2. Machining Parameters
2.3 Axis Parameters
Contents
The stored stoke limit function to be set in #8204
and #8205 prevents the machine from moving to the
inside or outside of the specified range.
0: Inhibits outside area
(select stored stroke limit II.)
1: Inhibits inside area
(select stored stroke limit II B.)
Enable or disable the parameter mirror image
function.
0: Disable
1: Enable
II - 13
Setup range (unit)
0/1
0/1