Mitsubishi Electric MELDAS 60 Series Parameter Manual page 297

(c) Setting the output scale
When "0" is set, the output will be made with the standard output unit. To change the output unit, set
a value other than "0".
The scale is set with a 1/256 unit. When 256 is set, the unit will be the same as the standard output.
# No.
2263 SV063
2264 SV064
(Example 1) When SV061 = 5, SV063 = 2560
The V-phase current value will be output with 1 A/V unit to D/A output ch.1.
(Example 2) When SV063 = 11, SV064 = 128
The position droop will be output with a 2mm/Vunit to D/A output ch.2.
7. Servo Parameters
7.4 Supplement
Abbrev Parameter name
DA1MPY D/A output channel 1
output scale
DA2MPY D/A output channel 2
output scale
II - 201