Mitsubishi Electric MELDAS 60 Series Parameter Manual page 72

2.2 Operator Messages
The following messages indicate the status of the setting and display functions‚ and are not operation
errors. They are mainly used to show that operation is normal‚ and serve as guides for the following
operations. There is no classification by numbers.
2.2.1 Search And Operation Related
Message
SEARCH EXECUTION
SEARCH COMPLET
BUFFER EDIT
CAN'T BUF. EDIT
DATA PROTECTING
2. Operation Messages on Setting And Display Unit
2.2 Operation Messages
• Search is being executed normally.
• Search was completed normally.
The buffer is being corrected. This
appears when the cursor or a tab key is
pressed and the buffer correction mode
is entered. This is erased when INPUT
is pressed.
When using 2 systems, the program
being buffer corrected is being used by
the other system.
Buffer correcting of a machine
manufacturer macro program was
attempted.
Buffer correcting is prohibited since the
data protection key 3 is valid.
Message details
I - 58