Mitsubishi Electric MELDAS 60 Series Parameter Manual page 170

# Items
1274 ext10 Word range
(PR) (bit7) check
1275 ext11
(PR)
1276 ext12
(PR)
1277 ext13 Tool life
(PR) (bit0) management II
count type 2
1278 ext14 Program restart
(PR) (bit0) method selection
1279 ext15 System
(PR) (bit0) synchroniza-
tion method
ext15 Interrupt amount
(bit1) during machine
lock
ext15 Selection of
(bit2) cutting start
interlock target
block
5. Base Specifications Parameters
Details
Select whether to check that the operation
expression of the word date in the program is
enclosed in brackets ( [ ] ) when the machine
program is executed.
This check is also applied to the 08000 to 09999
and the machine manufacture macro program.
0: Check valid
1: Check invalid
Not used.
Not used.
Specify how and when the mount or use count is
incremented in tool life management II.
0: Type 1
The count is incremented when the spindle is
used for cutting.
1: Type 2
The count is incremented for the tool used or
mounted for one program. The increment is
enabled by resetting.
Select the program restart method.
0: Type A
1: Type B
Select the system synchronization method.
0: If one system is not in automatic operation,
ignore the synchronization command and
execute the next block.
1: Operate according to the synchronization
ignore signal.
If the synchronization ignore signal is set to
"1", the synchronization command will be
ignored. When set to "0", synchronization will
be applied.
Select the manner to handle the interruption
amount during machine lock.
0: Cancel when reset.
1: Do not cancel when reset. Instead cancel
during manual zero point return.
Select whether the cutting start interlock is valid for
successive cutting blocks.
0: Valid for successive cutting blocks.
1: Invalid for successive cutting blocks.
II - 74
Setting range (unit)
0/1
0/1
(Default: 0)
0/1
0/1
0/1
0/1