Mitsubishi Electric MELDAS 60 Series Parameter Manual page 150

# Items
1214 macaxy Side 2 of
(For L inclination
system angle
only)
1215 macaxx Side 3 of
(For L inclination
system angle
only)
1216 extdcc External
deceleration
level
5. Base Specifications Parameters
Details
Specify the length of the actual base axis
corresponding to the inclined axis in the triangle
made up of the inclination angle.
Specify the length of the actual axis of the inclined
axis in the triangle made up of the inclination angle.
Use an upper limit value at the feedrate indicated
when validating external deceleration signals.
This parameter is valid when #1239 set11/bit6 is set
to 0.
II - 54
Setting range (unit)
±9999.999
±9999.999
1 to 999999 (mm/min)