Mitsubishi Electric MELDAS 60 Series Parameter Manual page 126

# Items
1060 SETUP Activate
setup
processing
5. Base Specifications Parameters
Execute the functions required for initializing the
system.
1: Execute one-touch setup
#(1060) Data( 1)(
"BASE PARA. SET? (Y/N)" is displayed.
To initialize the parameters.
Y
INPUT
The parameters are initialized according to
the setting values in #1001 to #1043.
"FORMAT?(Y/N)" is displayed.
To initialize the machining program
file and tool offset file.
Y
INPUT
The above files are initialized and the standard
canned cycle program is input.
"SETUP COMPLETE" is displayed.
Note: Most setup parameters will be initialized with
one-touch setup‚ so confirm the data before
executing.
This parameter will automatically be set to 0 when the
power is turned ON.
II - 30
Details
)
INPUT
To retain the current parameters.
N
INPUT
To retain the current machining
program file and tool offset file.
N
INPUT
Setting range (unit)
1