Mitsubishi Electric MELDAS 60 Series Parameter Manual page 75

2.2.4 S-analog Output Adjustment Related
Message
ADJUST EXECUTION
ADJUST COMPLETE
2.2.5 Auxiliary Axis
Message
CONTINUE Y/N
BACKUP EXECUTION
BACKUP COMPLETE
AUX. WRITING EXEC.
WRITE COMPLETE
ABS POS RESTORED
2.2.6 Parameter Backup Related
Message
BACKUP EXEC. Y/N
BACKUP EXECUTION
BACKUP COMPLTE
RESTORE EXEC. Y/N
RESTORE EXECUTION
RESTORE COMPLETE
2. Operation Messages on Setting And Display Unit
2.2 Operation Messages
• Analog output adjustment is being executed without error.
• Analog output adjustment has completed without error.
• Type "Y" or "N" to specify whether to perform operation.
• The auxiliary axis parameters are being backed up in SRAM.
• The backup of the auxiliary axis parameters in SRAM has been
completed.
• The auxiliary axis parameters in SRAM is being written to MR-J2-CT.
• The writing of the auxiliary axis parameters in SRAM to MR-J2-CT
has been completed.
• The absolute position in SRAM has been restored in MR-J2-CT.
Type "Y" or "N" to specify whether to perform the operation.
The parameters are being backed up.
Backup of the parameters has been completed.
Type "Y" or "N" to specify whether to perform the operation.
The parameters are being restored.
Restoration of the parameters has been completed.
Message details
Message details
Message details
I - 61