Mitsubishi Electric MELDAS 60 Series Parameter Manual page 123

# Items
1043 lang Select
language
displayed
1044 auxno MR-J2-CT
(PR) Connections
1045 nskno Megatorgue
(PR) motor
connections
1049 mmac_R Machine
(PR) maker macro
RAM-ROM
changeover
Note: Selection of inch and metric unit
When set value of #1041 I_inch is changed‚ the unit of length is changed after reset.
Among parameters concerning length‚ following items are not changed automatically‚ therefore
change the set values to agree with the new unit system when the unit system is changed.
5. Base Specifications Parameters
Specify the display language.
0: Japanese display
1: English display
2: Third language displayed (Note) (Option)
3: Fourth language displayed (Note) (Option)
11: Display in German
12: Display in French
13: Display in Italian
14: Display in Spanish
15: Display in Chinese
(traditional Chinese)
16: Display in Korean
17: Display in Portuguese
18: Display in Dutch
19: Display in Swedish
20: Display in Hungarian
22: Display in Chinese
(simplified Chinese)
23: Display in Russian
Note: If no character package is available for a
specified language, the screen is displayed
in English.
Specify the number of MR-J2-CTs connected.
Specify the number of NSK megatorque motors
connected. When a value other than 0 is specified,
2nd miscellaneous function data is output as signed
binary data.
Select the memory area for the machine
manufacturer macro program.
0: SRAM area
1: FROM area
When this parameter is changed, the power must be
turned OFF and ON, and the area must be formatted.
Note: "1" cannot be set if the machine
manufacturer macro option is not valid.
II - 27
Details
(Standard)
(Standard)
(Option)
(Option)
(Option)
(Option)
(Option)
(Option)
(Option)
(Option)
(Option)
(Option)
(Option)
(Option)
Setting range (unit)
0 to 3
11 to 22
0 to 4
0 to 16
0/1