Mitsubishi Electric MELDAS 60 Series Parameter Manual page 110

2.4 Barrier Data
# Item
8300 P0
(For L system only)
8301 P1
8302 P2
8303 P3
8304 P4
8305 P5
8306 P6
(For L system only)
8310 Barrier ON
(For L system only)
8311 P7
8312 P8
(For L system only)
8313 P9
8314 P10
(For L system only)
8315 BARRIER TYPE (L)
(For L system only)
8316 BARRIER TYPE (R)
(For L system only)
2. Machining Parameters
2.4 Barrier Data
Contents
Set the reference X-coordinates of the chuck and
the tail stock barrier.
Set the center coordinate (Radius value) of
workpiece by the basic machine coordinate system.
Set the area of the chuck and tail stock barrier.
(Radius value)
Set the coordinate value from the center of
workpiece for X-axis. Set the coordinate value by
basic machine coordinate system for Z-axis.
Select the validity of the chuck and tailstock barrier.
0: Invalid (Setting from special display unit valid)
1: Valid
Set the area of the left spindle section.
• X axis: Set the coordinate value from the
workpiece center (P0). (radius value)
• Z axis: Set the coordinates in the basic
machine coordinate system.
Set the area of the right spindle section.
• X axis: Set the coordinate value from the
workpiece center (P0). (radius value)
• Z axis: Set the coordinates in the basic
machine coordinate system.
Set the shape of the left chuck and tailstock barrier.
0: No area
1: Chuck
2: Tailstock
Set the shape of the right chuck and tailstock
barrier.
0: No area
1: Chuck
2: Tailstock
II - 14
Setup range (unit)
±99999.999 (mm)
±99999.999 (mm)
0/1
±99999.999 (mm)
±99999.999 (mm)
0/1/2
0/1/2