Mitsubishi Electric MELDAS 60 Series Parameter Manual page 129

# Items
1069 no_dsp Axis with no
(PR) counter
display
1070 axoff Axis
removal
±J0G
1071 J0G_D
(PR)
activation
signal
device
name
1072 chop_ax Chopping
axis
5. Base Specifications Parameters
Details
Set up an axis that displays no counter. This option is
valid on the counter display screen (relative value
screen).
Define an axis that enables axis removal control.
Specify the number of the device that inputs ±J0G
activation signals.
0: X device
1: G device
2: M device
Set the JOG_HP (#1066) and JOG_HN (#1067)
parameters according to this device specification
parameter.
Designate the chopping axis.
II - 33
Setting range (unit)
0: Displays the
counter
1: Does not display
the counter.
0: Disables axis
removal.
1: Enables axis
removal
0 to 2
0: Non-chopping
axis
1: Chopping axis