Mitsubishi Electric MELDAS 60 Series Parameter Manual page 159

# Items
aux11 Switch the
(bit7) range of tool life
data to be input
(For M system
only)
1228 aux12 Switch
(bit0) coordinate
value screen
aux12 Switch offset
(bit1) and parameter
screen
aux12 Switch data
(bit2) protection in
data
transmission
mode
aux12 Nose R
(bit3) specification
aux12 Select operation
(bit4) error or stop
code
aux12 Select constant
(bit5) surface speed
coordinates
aux12 Switch relative
(bit6) values
displayed
5. Base Specifications Parameters
Details
set up the range of tool life data to be input or
compared.
0: Inputs or compares all of the data output.
1: Inputs or compares part of the data output
1) Tool life management I data to be input or
compared tool number (D), lifetime (E),
life count (F), and auxiliary data (B).
2) Tool life management II data to be input or
compared Group number (G), method
(M), life (E/F), tool number (D), and
compensation number (H)
Note: When the maintenance function data input/
output #(99) ( ) is set, all data will be input
and compared.
Set up this option to switch the coordinate value
screen.
0: 80-character screen
1: 40-character screen
Set up this option to switch the offset and parameter
screen to the parameter screen.
0: Displays the offset and parameter screen.
1: Displays the parameter screen.
Set up the range of data protection in data
transmission mode.
0: Protects both send and receive data.
1: Protects receive data only.
Select whether to specify the nose R compensation
by shape or wear number.
0: Specifies the nose R compensation by shape
number.
1: Specifies the nose R compensation by wear
number.
Specify both block cutting start interlock and cutting
start interlock as the operation error or stop code.
0: Operation error
1: Stop code
Select constant surface speed coordinates.
0: Workpiece coordinate value
1: Absolute coordinate value
Select whether to preset the relative coordinates
with workpiece coordinate preset (G92.1) or counter
preset (G92).
0: Preset relative coordinates.
1: Do not preset relative coordinates.
II - 63
Setting range (unit)
0/1
0/1
0/1
0/1
0/1
0/1
0/1
0/1