Mitsubishi Electric MELDAS 60 Series Parameter Manual page 76

2.2.7 Others
Message
DATA PROTECTING
BASE PARA. SET? (Y/N)
BASE PARA EXECUTION
EXECUTE FORMAT? (Y/N)
FORMAT EXECUTION
SETUP COMPLETE
NON SETUP
CONFIRM OPE? (Y/N)
INPUT? (Y/N)
V-ANALIZER EXEC.
ROM WRITE? (Y/N)
DATA WRITING
WRITE COMPLETE
2. Operation Messages on Setting And Display Unit
2.2 Operation Messages
• The data protection key is valid‚ and the various data cannot be set or
erased‚ etc.
• Waiting for the key input of standard parameter setting (Y/N).
• The standard parameters are being set.
• Waiting for the key input of execute format (Y/N).
• Formatting is being executed.
• The simple setup has been completed.
Setup with #1060 SETUP "1" has been completed.
Formatting with #1060 SETUP "20" has been completed.
• Completed without executing simple setup.
(When "N" has been set for both "BASE PARA. SET? (Y/N)" and
"EXECUTE FORMAT? (Y/N)".)
• Confirmation for erasing operating time or alarm history.
• Waiting for the key input of tool length data by manual measurement.
• Waveform display data cannot be output while waveform is displayed.
• The system is waiting for a key input to indicate whether to write the
macro programs into the FROM.
• The macro program is being written into the FROM.
• The macro program has been written into the FROM.
Message details
I - 62