Mitsubishi Electric MELDAS 60 Series Parameter Manual page 35

Alarm No.
No servo option is found.
2304
The SHG control is an optional function.
No servo option is found.
2305
The adaptive filtering is an optional
function.
The spindle parameter setting data is
3201 - 3584
illegal.
The alarm No. is the No. of the spindle
parameter where the error occurred.
1. List of Alarms
1.3 Servo spindle Alarms
Details
I - 21
Remedy
Check that all the related parameters are
specified correctly.
sv057:SHGC
sv058:SHGCsp
Check that all the related parameters are
specified correctly.
sv027:SSF1/aflt
Check the descriptions for the appropriate
spindle parameters and correct them.
Refer to Spindle Drive Maintenance Manual.