Mitsubishi Electric MELDAS 60 Series Parameter Manual page 419

Hide thumbs Also See for MELDAS 60 Series:

Position switch numbers of PSW1 to PSW8 and signal devices

Instead of the dog switch provided on the machine axis‚ the coordinate values indicating imaginary dog

positions (dog1 and dog2) on the coordinate axis of the axis name preset with axis are set with the position

switches (PSW1 - PSW8). When the machine reaches the position‚ the signal is output to the device

corresponding to the PLC interface.

Example of settings of dog1 and dog2 and operation

Setting of dog1 and

12. Position Switch

12.1 Outline of Function

dog1, dog2 position

System 1 device

A signal is output between

dog1 and dog2.

A signal is output between

dog1 and dog2.

If dog1 equals dog2‚ the

dog1 position triggers a

System 2 device

Basic machine coordinate

system zero point