Mitsubishi Electric MELDAS 60 Series Parameter Manual page 172

# Items
1280 ext16 Cross
(PR) (bit1) machining
control cancel
with reset
ext16 Interchange
(bit2) coordinate value
display
ext16 Reset operation
(bit3) for synchroniza-
tion/super-
imposition
control
5. Base Specifications Parameters
Details
Select whether to cancel the cross machining
control when reset is applied.
0: Cancel cross machining control with reset.
1: Do not cancel cross machining control with
reset
Set whether to interchange (or move) the coordinate
values when displaying.
This setting will be followed when the axes are
interchanged and when the axes are moved.
0: Interchange (or move) coordinate values with
cross machining control, and display.
1: Display coordinate values for cross
machining control without interchanging (or
moving).
(Example) When 1st system's C axis is moved to
2nd system with a 1st system (X, Z, C,
Y) and 2nd system (X, Z) configuration:
1st system: X, Z and Y coordinate
2nd system: X, Z and C coordinate
Select whether to cancel synchronization/
superimposition control with resetting.
0: Cancel.
1: Do not cancel.
II - 76
values are displayed.
values are displayed.
Setting range (unit)
0/1
0/1
0/1