Mitsubishi Electric MELDAS 60 Series Parameter Manual page 158

# Items
aux11 Measures
(bit2) against tool
setter chattering
aux11 Absolute
(bit3) coordinate
switching (nose
R)
[Special display
unit compatible]
aux11 Program
(bit4) address check
aux11 Spindle rotation
(bit5) speed clamp
aux11 Word edit menu
(bit6)
5. Base Specifications Parameters
Details
Select a condition where a relieving operation
completes after measurement with tools.
0: Sensor signals has stopped for 500 ms or
longer.
1: 100 μs or longer has passed after sensor
signals stopped.
Select whether to display a tool nose position or
coordinate value with the absolute coordinate
counter.
0: Displays the tool nose position.
1: Displays the position specified by program
command.
Specify whether to simply check the program
address when the machining program is executed.
0: Don't check the program address.
1: Check the program address.
Specify whether to clamp the rotation in constant
surface speed mode when the spindle rotation
speed clamp command is issued.
0: Clamp the rotation regardless of the constant
surface speed mode.
1: Clamp the rotation only in constant surface
speed mode.
Select the word edit menu format.
Set 0 in this parameter to select the following
menu format:
LOOK UP DELETE REPLACE
COPY
SEARCH B.G. SRH
B.G. END
WORD ↓ WORD ↑ STR ↓
Set 1 in this parameter to select the following men
COPY
LOOK UP DELETE REPLACE
SEARCH B.G. SRH B.G. END
WORD ↓ WORD ↑ STR ↓
II - 62
MENU
INSERT
PROGRAM MENU
COMMENT
RETURN
STR ↑
RETURN
MENU
PROGRAM
INSERT MENU
COMMENT RETURN
STR ↑
RETURN
Setting range (unit)
0/1
0/1
0/1
0/1
0/1