Advertisement
Sigma II User's Manual
Using the Panel Operator
YASKAWA
200V
SERVOPACK
SGDM-
1. Press the MODE/SET key to select the auxiliary function mode.
MODE/SET
DATA/
CHARGE
POWER
2. Press the Up Arrow
3. Press the DATA/SHIFT key for a minimum of one second, and the display will
be as shown below.
4. Input the value (0001) and press the MODE/SET key. The display will change
to one shown below and the write protect will be established.
5. Press the DATA/SHIFT key for a minimum of one second to return to the auxil-
iary function mode display.
This completes the procedure for setting the write protect. The new setting pass-
word will be valid after the next power OFF/ON cycle.
or Down Arrow
key to select the parameter Fn010.
Flashing
for one
second
7-55
Chapter 7: Using the Digital Operator
Advertisement
