Advertisement
Sigma II User's Manual
Using the Panel Operator
YASKAWA
200V
SERVOPACK
SGDM-
1. Press the MODE/SET key to select the auxiliary function mode.
MODE/SET
DATA/
CHARGE
POWER
2. Press the Up Arrow
3. Press the DATA/SHIFT key for a minimum of one second, and the display will
be as shown below.
4. Press the MODE/SET key to clear the alarm traceback data. The following dis-
play will flash for one second, and, after the alarm traceback data is cleared, the
display will return to the one shown above in step 3.
5. Press the DATA/SHIFT key for a minimum of one second to return to the
parameter code display.
This completes the alarm traceback data clearing procedure.
or Down Arrow
key to select the parameter Fn006.
Flashing for
one second
7-36
Chapter 7: Using the Digital Operator
Advertisement
