Advertisement
Sigma II User's Manual
T
Reference Pulse/Feedback Pulse Counter Monitor Display
The monitor display of reference pulse counter and feedback pulse counter is
expressed in 32-bit hexadecimal.
The display procedure is as follows:
Using the Hand-Held Digital Operator
1. Press the DSPL/SET key to select the monitor mode.
2. Press the Up Arrow
3. Presss the DATA/ENTER key to display the data for the monitor number
selected in the above step.
4. Press the Up Arrow
most and the rightmost 16-bit data.
5. Press both the Up Arrow
32-bit counter data.
6. Press the DATA/ENTER key once more to return to the monitor number dis-
play.
Using the Panel Operator
YASKAWA
200V
SERVOPACK
SGDM-
1. Press the MODE/SET key to select the monitor mode.
MODE/SET
DATA/
CHARGE
POWER
2. Press the Up Arrow
3. Press the DATA/SHIFT key for a minimum of one second to display the data for
the monitor number selected in the above step.
4. Press the Up Arrow
or Down Arrow
or Down Arrow
Leftmost 16-bit Data
or Down Arrow
or Down Arrow
or Down Arrow
7-21
Chapter 7: Using the Digital Operator
key to select "Un00C" or "Un00D".
key to alternately display the left-
Rightmost 16-bit Data
keys simultaneously to clear the
key to select "Un00C" or "Un00D".
key to alternately display the left-
Advertisement
