Advertisement
Sigma II User's Manual
will rotate the motor in the reverse direction. When the parameter is set to
Pn000.0 = 1, the rotation of the motor is reversed.
6. Press the DATA/SHIFT key for a minimum of one second to return to the auxil-
iary function mode display.
This completes the origin search operation.
7.2.9
Initializing Parameter Settings
This function is used to restore all the parameters to the default settings (standard
factory settings).
• Initialize the parameter settings with the servo OFF.
Follow the procedure below to initialize parameter settings.
Using the Hand-Held Digital Operator
1. Press the DSPL/SET key to select the auxiliary function mode.
2. Select the parameter Fn005.
Press the Left Arrow
Press the Up Arrow
3. Press the DATA/ENTER key, and the display will be as shown below.
4. Press the DSPL/SET key, and the display will be as shown below. The parame-
Up: Forward
Down: Reverse
IMPORTANT
or Right Arrow
or Down Arrow
7-43
Chapter 7: Using the Digital Operator
Keeps flashing unti
origin search is
completed.
key to select the digit.
key to change the value.
Advertisement
