Table Of Contents - Dell Force10 Terascale E Series Reference Manual

dot1x max-eap-req
c e s
Configure the maximum number of times an EAP (Extensive Authentication Protocol) request is
transmitted before the session times out.
Syntax dot1x max-eap-req number
To return to the default, use the no dot1x max-eap-req command.
Parameters
number
Defaults 2
Command Modes
INTERFACE
Command
Version 7.6.1.0
History
Version 7.4.1.0
dot1x max-supplicants
c e s
Restrict the number of supplicants that can be authenticated and permitted to access the network
t
through the port. This configuration is only takes effect in multi-auth mode.
Syntax dot1x max-supplicants number
Parameters
number
Defaults
128 hosts can be authenticated on a single authenticator port.
Command Modes INTERFACE
Command
Version 8.4.1.0
History
Related
dot1x host-mode
Commands
dot1x port-control
c e s
Enable port control on an interface.
Syntax dot1x port-control {force-authorized | auto | force-unauthorized}
Enter the number of times an EAP request is transmitted before a session time-out.
Range: 1 to 10
Default: 2
Introduced on C-Series and S-Series
Introduced on E-Series
Enter the number of supplicants that can be authenticated on a single port in
multi-auth mode.
Range: 1-128
Default: 128
Introduced on C-Series and S-Series
802.1X | 195