Advertisement
Example
Figure 12-11. Command Example: show ip bgp dampened-paths
>show ip bgp damp
BGP table version is 210708, local router ID is 63.114.8.2
Status codes: s suppressed, d damped, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
Network
>
Table 12-5
Table 12-5. show ip bgp dampened-paths Command Example
Field
Network
From
Reuse
Path
Command
Version 7.8.1.0
History
Version 7.7.1.0
show ip bgp detail
c e s
Display BGP internal information for IPv4 Unicast address family.
Syntax
show ip bgp [ipv4 unicast] detail
Defaults
none
Command Modes
EXEC
EXEC Privilege
From
Reuse
defines the information displayed in
Introduced support on S-Series
Introduced support on C-Series
Path
Figure
12-11.
Description
Displays the network ID to which the route is dampened.
Displays the IP address of the neighbor advertising the dampened route.
Displays the hour:minutes:seconds until the dampened route is available.
Lists all the ASs the dampened route passed through to reach the
destination network.
Border Gateway Protocol IPv4 (BGPv4) | 373
Advertisement
