Advertisement
neighbor next-hop-self
Allows you to configure the router as the next hop for a BGP neighbor.
c e
Syntax
neighbor ipv6-address | peer-group-name next-hop-self
To return to the default setting, use the no neighbor ipv6-address | peer-group-name
next-hop-self command.
Parameters
ipv6-address
peer-group-name
Defaults
Disabled.
Command Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
Version 8.4.2.1
History
Version 7.4.1.0
Usage
If the
Information
precedence over the
neighbor remove-private-as
Remove private AS numbers from the AS-PATH of outgoing updates.
c e
neighbor ipv6-address | peer-group-name remove-private-as
Syntax
To return to the default, use the no neighbor ipv6-address | peer-group-name
remove-private-as command.
Parameters
ipv6-address
peer-group-name
Defaults
Disabled (that is, private AS number are not removed).
Command Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
Version 8.4.2.1
History
Version 7.4.1.0
(OPTIONAL) Enter the IPv6 address in the
The
(OPTIONAL) Enter the name of the peer group.
Introduced on C-Series and S4810.
Introduced on E-Series TeraScale
set ipv6 next-hop
command in the ROUTE-MAP mode is configured, its configuration takes
neighbor next-hop-self
(OPTIONAL) Enter the IPv6 address in the
The
(OPTIONAL) Enter the name of the peer group to remove the private AS
numbers
Introduced on C-Series and S4810.
Introduced on E-Series TeraScale
::
notation specifies successive hexadecimal fields of zeros.
command.
::
notation specifies successive hexadecimal fields of zeros.
IPv6 Border Gateway Protocol (IPv6 BGP) | 805
x:x:x:x::x
format.
x:x:x:x::x
format.
Advertisement
