Advertisement
Usage
Information
Related
Commands
seq
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
266
|
Access Control Lists (ACL)
Sequence numbers for this filter are automatically assigned starting at sequence number 5.
If the options ge or le are not used, only packets with an exact match to the prefix are filtered.
deny
Configure a filter to drop packets.
seq
Configure a drop or permit filter with a specified sequence number.
Assign a sequence number to a deny or permit filter in a prefix list while configuring the filter.
seq sequence-number {deny | permit} {any} | [ip-prefix /nn {ge min-prefix-length} {le
max-prefix-length}] | [bitmask number]
sequence-number
deny
permit
any
ip-prefix /nn
ge min-prefix-length
le max-prefix-length
bitmask number
Not configured.
PREFIX-LIST
Version 8.1.1.0
Introduced on E-Series ExaScale
Version 7.6.1.0
Added support for S-Series
Version 7.5.1.0
Added support for C-Series
Version 6.3.1.0
Added bit mask option
If the options ge or le are not used, only packets with an exact match to the prefix are filtered.
deny
Configure a filter to drop packets.
permit
Configure a filter to pass packets.
Enter a number.
Range: 1 to 4294967294.
deny
Enter the keyword
to configure a filter to drop packets meeting this
condition.
permit
Enter the keyword
to configure a filter to forward packets meeting
this condition.
(OPTIONAL) Enter the keyword
(OPTIONAL) Specify an IP prefix in the network/length format. For example,
35.0.0.0/8 means match the first 8 bits of address 35.0.0.0.
(OPTIONAL) Enter the keyword
which is a number from zero (0) to 32.
(OPTIONAL) Enter the keyword
which is a number from zero (0) to 32.
bitmask
Enter the keyword
followed by a bit mask number in dotted
decimal format.
any
to match any packets.
ge
followed by the minimum prefix length,
le
followed by the maximum prefix length,
Advertisement
