Advertisement
Usage
Information
show protocol-termination-table
e
Syntax
Parameters
Defaults
Command Modes
678
|
IPv4 Routing
Table 24-16. show ip traffic output definitions
Keyword
Definition
...no port broadcasts
The incoming broadcast/multicast packet did not have any listener.
...socket full
The applications buffer was full and the incoming packet had to be dropped.
The F10 Monitoring MIB provides access to the statistics described below.
Table 24-17. F10 Monitoring MIB
Command Display
IP statistics:
Bcast:
Received
Sent
Mcast:
Received
Sent
ARP statistics:
Rcvd:
Request
Replies
Sent:
Request
Replies
Proxy
Display the IP Packet Termination Table (IPPTT).
show protocol-termination-table linecard number port-set port-pipe-number
linecard number
port-set port-pipe-number
No default behavior or values
EXEC
EXEC Privilege
Object
f10BcastPktRecv
1.3.6.1.4.1.6027.3.3.5.1.1
f10BcastPktSent
1.3.6.1.4.1.6027.3.3.5.1.2
f10McastPktRecv
1.3.6.1.4.1.6027.3.3.5.1.3
f10McastPktSent
1.3.6.1.4.1.6027.3.3.5.1.4
f10ArpReqRecv
1.3.6.1.4.1.6027.3.3.5.2.1
f10ArpReplyRecv
1.3.6.1.4.1.6027.3.3.5.2.3
f10ArpReqSent
1.3.6.1.4.1.6027.3.3.5.2.2
f10ArpReplySent
1.3.6.1.4.1.6027.3.3.5.2.4
f10ArpProxySent
1.3.6.1.4.1.6027.3.3.5.2.5
linecard
Enter the keyword
card.
E-Series Range: 0 to 13 on a E1200/1200i, 0 to 6 on a E600/E600i,
and 0 to 5 on a E300
port-set
Enter the keyword
number.
Range: 0 to 1
OIDs
followed by slot number of the line
followed by the line card's Port-Pipe
Advertisement
