Advertisement
•
Related
show bfd neighbors
Commands
bfd neighbor
neighbor bfd disable
bfd disable
c e
Disable BFD on all interfaces.
Syntax
bfd disable
Re-enable BFD using the command no bfd disable.
Defaults
BFD is disabled by default.
Command Modes
INTERFACE VRRP
Command
Version 8.2.1.0
History
Version 7.6.1.0
Version 7.5.1.0
bfd enable (Configuration)
c e
Enable BFD on all interfaces.
Syntax
bfd enable
Disable BFD using the no bfd enable command.
Defaults
BFD is disabled by default.
Command Modes
CONFIGURATION
Command
Version 8.2.1.0
History
Version 7.6.1.0
Version 7.4.1.0
Neighbors that have been explicitly enabled or disabled for a BFD session with the
neighbor bfd disable
commands in ROUTER BGP mode do not inherit the global BFD enable/
disable values configured with the
which a neighbor belongs. The neighbors inherit only the global timer values (configured with the
bfd all-neighbors
command).
Display BFD neighbor information on all interfaces or a specified interface.
Explicitly enable a BFD session with a BGP neighbor or a BGP peer group.
Explicitly disable a BFD session with a BGP neighbor or a BGP peer group.
Introduced on E-Series ExaScale
Introduced on C-Series
Introduced on E-Series
Introduced on E-Series ExaScale
Introduced on C-Series
Introduced on E-Series
bfd all-neighbors
command or configured for the peer group to
Bidirectional Forwarding Detection (BFD) | 303
bfd neighbor
or
Advertisement
