Dell Force10 TeraScale E Series Reference Manual page 393

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
address family ipv4 multicast (MBGP)
c e s
This command changes the context to SAFI (Subsequent Address Family Identifier).
t
Syntax address family ipv4 multicast
To remove SAFI context, use the no address family ipv4 multicast command.
Parameters
ipv4
multicast
Defaults IPv4 Unicast
Command Modes
ROUTER BGP (conf-router_bgp)
Usage All subsequent commands will apply to this address family once this command is executed. You can
Information
exit from this AFI/SAFI to the IPv4 Unicast (the default) family by entering exit and returning to the
Router BGP context.
Command
Version 7.8.1.0
History
Version 7.7.1.0
neighbor default-originate
neighbor distribute-list
neighbor filter-list
neighbor maximum-prefix
neighbor next-hop-self
neighbor remove-private-as
neighbor route-map
neighbor route-reflector-client
neighbor soft-reconfiguration inbound
network
redistribute
redistribute ospf
show ip bgp ipv4 multicast
show ip bgp cluster-list
show ip bgp community
show ip bgp community-list
show ip bgp dampened-paths
show ip bgp filter-list
show ip bgp flap-statistics
show ip bgp inconsistent-as
show ip bgp ipv4 multicast
show ip bgp ipv4 multicast neighbors
show ip bgp peer-group
show ip bgp summary
Introduced support on S-Series for MBGP IPv4 Multicast
Introduced support on C-Series
ipv4
Enter the keyword to specify the address family as IPV4.
multicast
Enter the keyword to specify multicast as SAFI.
Border Gateway Protocol IPv4 (BGPv4) | 393