Package Contents - Dell Networking X1000 Series Getting Started Manual

Welcome
This document provides basic information to install and start running the
following Dell Networking X-series switches: X1008/X1008P , X1018/X1018P ,
X1026/X1026P , X1052/X1052P and X4012.
The switch is delivered from the factory in Unmanaged Mode to avoid
unauthorized access to the switch. To use the switch in Managed Mode, press
the Mode button for at least seven seconds. The MGMT LED will illuminate
when in Managed Mode. To switch back to Unmanaged Mode, repeat the
process.
These Dell networking devices are ideal for the small to medium business
that requires high performance network connectivity along with advanced
web management features. The management features are designed to
minimize administrative management effort, while enhancing and improving
network traffic control.
For the latest documentation and software updates, go to dell.com/support.
Safety Environmental and Regulatory Information (SERI) is included in the
printed documentation.

Package Contents

While unpacking the device, make sure that the following items are included:
• The ordered network switch
• AC power cable (and power brick only for the X1008 and X1008P)
• Console micro-USB serial cable
• Self-adhesive rubber pads (for desk or shelf installation on select systems)
• Installation kit
• Safety Environmental and Regulatory Information document
• Placemat
• This Getting Started Guide
Getting Started Guide
3