Advertisement
show cam mac linecard (dynamic or static)
c e
Syntax
Parameters
Command Modes
Command
History
878
|
Layer 2
CAM size and the portions allocated for MAC addresses and for MAC ACLs.
Display the
show cam mac linecard slot port-set port-pipe [address mac_addr | dynamic | interface
interface | static | vlan vlan-id]
linecard slot
port-set port-pipe
address mac-addr
dynamic
interface interface
static
vlan vlan-id
EXEC
EXEC Privilege
Version 7.5.1.0
Added support for C-Series
pre-Version 6.2.1.1
Introduced on E-Series
(REQUIRED) Enter the keyword
select the linecard for which to gather information.
C-Series Range: 0 to 4 (C150); 0 to 8 (C300)
E-Series Range: 0 to 6
(REQUIRED) Enter the keyword
to select the Port-Pipe for which to gather information.
Range: 0 or 1
(OPTIONAL) Enter the keyword
the nn:nn:nn:nn:nn:nn format to display information on that MAC address.
(OPTIONAL) Enter the keyword
addresses learned dynamically by the switch.
(OPTIONAL) Enter the keyword
slot and port information:
•
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
•
For a Port Channel interface, enter the keyword
followed by a number:
C-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to
512 for ExaScale.
•
For a SONET interface, enter the keyword
port information.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
(OPTIONAL) Enter the keyword
specifically configured on the switch.
(OPTIONAL) Enter the keyword
the MAC address assigned to the VLAN.
Range: 1 to 4094.
linecard
followed by a slot number to
port-set
followed by a Port-Pipe number
address
followed by a MAC address in
dynamic
to display only those MAC
interface
followed by the interface type,
port-channel
sonet
followed by the slot/
followed by the slot/port information.
static
to display only those MAC address
vlan
followed by the VLAN ID to display
Advertisement
