Dell Force10 TeraScale E Series Reference Manual page 945

revision
c e s
The revision number for the Multiple Spanning Tree configuration
revision range
Syntax
To return to the default values, enter no revision.
Parameters
range
Defaults 0
Command Modes MULTIPLE SPANNING TREE
Command
Version 7.6.1.0
History
Version 7.5.1.0
Version 6.5.1.0
Usage For two MSTP switches to be within the same MST region, the switches must share the same revision
Information
number.
Related
msti
Commands
name
show config
c e s
View the current configuration for the mode. Only non-default values are shown.
Syntax show config
Command Modes MULTIPLE SPANNING TREE
Command
Version 7.6.1.0
History
Version 7.5.1.0
Version 6.5.1.0
Example Figure 34-3. show config Command for MULTIPLE SPANNING TREE Mode
Enter the revision number for the MST configuration.
Range: 0 to 65535
Default: 0
Added support for S-Series
Added support for C-Series
Introduced
Map the VLAN(s) to an MST instance
Assign the region name to the MST region.
Added support for S-Series
Added support for C-Series
Introduced on E-Series
FTOS(conf-mstp)#show config
!
protocol spanning-tree mstp
no disable
name CustomerSvc
revision 2
MSTI 10 VLAN 101-105
max-hops 5
FTOS(conf-mstp)#
Multiple Spanning Tree Protocol (MSTP) | 945