Advertisement
Parameters
Command Modes
Command
History
clear ip bgp ipv6-address
c e
Syntax
Parameters
750
|
IPv6 Border Gateway Protocol (IPv6 BGP)
as-number
flap-statistics
ipv4
ipv6
unicast
multicast
soft
in
out
EXEC Privilege
Version 8.4.2.1
Introduced on C-Series and S4810.
Version 8.2.1.0
Introduced on E-Series ExaScale
Version 7.4.1.0
Introduced on E-Series TeraScale
Reset BGP sessions specific to an IPv6 address on the E-Series. The soft parameter (BGP Soft
Reconfiguration) clears the policies without resetting the TCP connection.
clear ip bgp ipv6-address [flap-statistics | ipv4 {multicast {flap-statistics | soft {in | out}}
| unicast {flap-statistics | soft {in | out}} | ipv6 unicast {flap-statistics | soft {in | out}|
soft [in | out]
ipv6-address
flap-statistics
ipv4
ipv6
unicast
Enter an autonomous system (AS) number to reset neighbors belonging to
that AS. If used without a qualifier, the keyword resets all neighbors
belonging to that AS.
Range: 1 to 65535
(OPTIONAL) Enter the keyword
statistics belonging to that AS or a specified address family within that AS.
(OPTIONAL) Enter the keyword
family.
(OPTIONAL) Enter the keyword
family.
(OPTIONAL) Enter the keyword
within the selected address family.
(OPTIONAL) Enter the keyword
within the selected address family.
Multicast is supported on IPv4 only
(OPTIONAL) Enter the keyword
without resetting the BGP TCP session, that is, BGP Soft Reconfiguration.
Note:
clear ip bgp ipv6-address soft
If you enter
outbound policies are reset.
(OPTIONAL) Enter the keyword
(OPTIONAL) Enter the keyword
Enter an IPv6 address to reset neighbors belonging to that IP. Used without a
qualifier, the keyword resets all neighbors belonging to that IP.
(OPTIONAL) Enter the keyword
statistics belonging to that AS or a specified address family within that IP.
(OPTIONAL) Enter the keyword
family.
(OPTIONAL) Enter the keyword
family.
(OPTIONAL) Enter the keyword
within the selected address family.
flap-statistics
to clear all flap
ipv4
to select options for that address
ipv6
to select options for that address
unicast
to select the unicast option
multicast
to select the multicast option
soft
to configure and activate policies
, both inbound and
in
to activate only inbound policies.
out
to activate only outbound policies.
flap-statistics
to clear all flap
ipv4
to select options for that address
ipv6
to select options for that address
unicast
to select the unicast option
Advertisement
