Advertisement
Access Control Lists (ACL)
Overview
Access Control Lists (ACLs) are supported on platforms
FTOS supports the following types of Access Control List (ACL), IP prefix list, and route map:
•
•
•
•
•
•
•
•
•
•
•
Commands Common to all ACL Types
The following commands are available within each ACL mode and do not have mode-specific options.
Some commands may use similar names, but require different options to support the different ACL
types (for example, deny).
•
•
•
Commands Common to all ACL Types
Common IP ACL Commands
Standard IP ACL Commands
Extended IP ACL Commands
Common MAC Access List Commands
Standard MAC ACL Commands
Extended MAC ACL Commands
IP Prefix List Commands
Route Map Commands
AS-Path Commands
IP Community List Commands
Note:
For ACL commands used in the Trace function, see the section
in the chapter Security.
Note:
For IPv6 ACL commands, see
description
remark
show config
c e s
Chapter 25, IPv6 Access Control Lists (IPv6
9
Trace List Commands
ACLs).
Access Control Lists (ACL) | 205
Advertisement
