Download Print this page

Dell Force10 TeraScale E Series Reference Manual page 554

Ftos command line, ftos 8.4.2.7

Advertisement

show ip igmp interface
c e s
Syntax
Parameters
Command Modes
Command
History
Usage
Information
Example
554
|
Internet Group Management Protocol (IGMP)
View information on the interfaces participating in IGMP.
show ip igmp interface [interface]
interface
(OPTIONAL) Enter the interface type and slot/port information:
For a 100/1000 Ethernet interface, enter the keyword
the slot/port information.
For a 1-Gigabit Ethernet interface, enter the keyword
the slot/port information.
For a Port Channel interface, enter the keyword
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale.
For a Loopback interface, enter the keyword
16383.
For a SONET interface, enter the keyword
For a 10-Gigabit Ethernet interface, enter the keyword
by the slot/port information.
For a VLAN interface enter the keyword vlan followed by a number from 1 to 4094.
EXEC
EXEC Privilege
Version 7.6.1.0
Introduced on S-Series
Version 7.5.1.0
Introduced on C-Series
E-Series legacy command
IGMP commands accept only non-VLAN interfaces—specifying VLAN will not yield a results.
Figure 22-2. show ip igmp interface Command Example
FTOS#show ip igmp interface
GigabitEthernet 0/0 is down, line protocol is down
Internet protocol processing disabled
GigabitEthernet 0/5 is down, line protocol is down
Internet protocol processing disabled
GigabitEthernet 0/6 is down, line protocol is down
Internet protocol processing disabled
GigabitEthernet 0/7 is up, line protocol is down
Internet protocol processing disabled
GigabitEthernet 7/9 is up, line protocol is up
Internet address is 10.87.5.250/24
IGMP is enabled on interface
IGMP query interval is 60 seconds
IGMP querier timeout is 120 seconds
IGMP max query response time is 10 seconds
IGMP last member query response interval is 1000 ms
IGMP activity: 0 joins, 0 leaves
IGMP querying router is 10.87.5.250 (this system)
IGMP version is 2
gigabitethernet
gigabitethernet
port-channel
followed by a number:
loopback
followed by a number from 0 to
sonet
followed by the slot/port information.
tengigabitethernet
followed by
followed by
followed

Advertisement

loading