Advertisement
Usage
Information
Related
Commands
set metric
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands
set metric-type
c e s
Syntax
Parameters
Defaults
282
|
Access Control Lists (ACL)
The
set local-preference
route map criteria. To change the LOCAL_PREF for all routes, use the
local-preference
command.
bgp default local-preference
Configure a filter to assign a new metric to redistributed routes.
set metric [+ | -] metric-value
To delete a setting, enter no set metric.
+
(OPTIONAL) Enter + to add a metric-value to the redistributed routes.
-
(OPTIONAL) Enter - to subtract a metric-value from the redistributed routes.
metric-value
Enter a number as the new metric value.
Range: zero (0) to 4294967295
Not configured
ROUTE-MAP
Version 8.1.1.0
Introduced on E-Series ExaScale
Version 7.6.1.0
Support added for S-Series
Version 7.5.1.0
Support added for C-Series
pre-Version 6.1.1.0
Introduced for E-Series
set automatic-tag
set level
set metric-type
set tag
Configure a filter to assign a new route type for routes redistributed to OSPF.
set metric-type {internal | external | type-1 | type-2}
internal
Enter the keyword
hop as the route's BGP MULTI_EXIT_DES (MED) value.
external
Enter the keyword
type-1
Enter the keyword
type-2
Enter the keyword
Not configured.
command changes the LOCAL_PREF attribute for routes meeting the
Change default LOCAL_PREF attribute for all routes.
Compute the tag value of the route.
Specify the OSPF area for route redistribution.
Specify the route type assigned to redistributed routes.
Specify the tag assigned to redistributed routes.
internal
to assign the Interior Gateway Protocol metric of the next
external
to assign the IS-IS external metric.
type-1
to assign the OSPF Type 1 metric.
type-2
to assign the OSPF Type 2 metric.
bgp default
Advertisement
