Advertisement
Command Modes
Command
History
clear ip bgp peer-group
c e s
Syntax
Parameters
Command Modes
Command
History
clear ip bgp dampening
c e s
Syntax
Parameters
Command Modes
Usage
Information
Command
History
334
|
Border Gateway Protocol IPv4 (BGPv4)
in
out
EXEC Privilege
Version 8.4.1.0
Added BGP Soft Reconfiguration support for IPv4 unicast and IPv6 routes
Version 7.8.1.0
Introduced support on S-Series
Version 7.7.1.0
Introduced support on C-Series
Version 7.2.1.0
Introduced
Reset a peer-group's BGP sessions.
clear ip bgp peer-group peer-group-name
peer-group-name
EXEC Privilege
Version 7.8.1.0
Introduced support on S-Series
Version 7.7.1.0
Introduced support on C-Series
Clear information on route dampening and return suppressed route to active state.
clear ip bgp dampening [ip-address mask]
ip-address mask
EXEC Privilege
After you enter this command, the software deletes history routes and returns suppressed routes to
active state.
Version 7.8.1.0
Introduced support on S-Series
Version 7.7.1.0
Introduced support on C-Series
Reapply only inbound policies. Note: If you enter
out
option, both inbound and outbound policies are reset.
Reapply only outbound policies. Note: If you enter
out
option, both inbound and outbound policies are reset.
Enter the peer group name to reset the BGP sessions within that peer group.
(OPTIONAL) Enter an IP address in dotted decimal format and the prefix mask
in slash format (/x) to clear dampening information only that BGP neighbor.
soft
in
, without an
or
soft
in
, without an
or
Advertisement
