Advertisement
If the debug command has spaces, such as debug ip bgp events, put the words following debug in
double quotes.
Related
action-list
Commands
seq cli-show
c e
Configure an action to collect the output of the designated show command a designated number of
times at a designated time interval.
Syntax
seq number cli-show command repeat number delay seconds
Parameters
seq number
cli-show
show-command
repeat number
delay seconds
Defaults
None
Command Modes
CALL-HOME ACTION-LIST
Command
Version 8.2.1.0
History
Version 7.8.1.0
Usage
If the command has spaces. such as show processes cpu time, put the words following show in
double quotes, as shown in the following example.
Related
action-list
Commands
Specify an action list for the associated policy and enter the
conf-call-home-actionlist-name mode.
seq
Use the keyword
followed by a number that FTOS uses to execute the list of
actions in numerical order.
cli-show
Enter the keyword
Range: 1-100(max 100 chars including quotes)
repeat
Enter the keyword
show
designated
command should be collected.
Range: 1–10 (number of times to collect output)
delay
Enter the keyword
, followed by the interval, in number of seconds, to wait in
collecting instances of the output of the designated
Range: 1–120 (number of seconds to wait between collections)
seq
Added keyword
.
Introduced on C-Series and E-Series
Specify an action list for the associated policy and enter the
conf-call-home-actionlist-name mode.
show
, followed by a
command.
, followed by the number of times that the output of the
show
command.
FTOS Service Agent | 499
Advertisement
