Advertisement
ACL VLAN Group
Overview
The ACL VLAN Group feature is available only on the E-Series, as indicated by this symbol under
each command heading:
Since VLAN ACLs exist as multiple ACLs in the CAM, the size of the ACLs can be limited in the
CAM. The ACL VLAN Group feature permits you to group VLANs and apply ACLs to the group so
that ACLs exist as a single ACL in the CAM.
Commands
The ACL VLAN Group commands are:
•
•
•
•
•
•
•
See other VLAN commands in
acl-vlan-group
e
Create an ACL VLAN group
Syntax
acl-vlan-group {group name}
Parameters
group name
Defaults
No default behavior or values
Command Modes
CONFIGURATION
e
Note:
This feature is supported on IPv4 only and can only be used with the ipv4-egacl-16k
CAM Profile with the acl-group microcode. See
(CAM).
acl-vlan-group
description
ip access-group
member vlan
show acl-vlan-group
show config
show running config acl-vlan-group
Chapter 9, Access Control Lists
Specify the name of the ACL VLAN group (maximum 140 characters).
10
Chapter 13, Content Addressable Memory
(ACL).
ACL VLAN Group | 295
Advertisement
