Advertisement
S-Series Example
upgrade (E-Series version)
e
Syntax
Parameters
52
|
File Management
show version Command Fields
Lines beginning with
128K bytes...
1 Route Processor...
Command output example on an S50V: show version
FTOS#show version
Force10 Networks Real Time Operating System Software
Force10 Operating System Version: 1.0
Force10 Application Software Version: E7-8-1-13
Copyright (c) 1999-2008 by Force10 Networks, Inc.
Build Time: Mon Nov 24 18:59:27 2008
Build Path: /sites/sjc/work/sw/build/build2/Release/E7-8-1/SW/SRC
Force10 uptime is 1 minute(s)
System Type: S50V
Control Processor: MPC8451E with 252739584 bytes of memory.
32M bytes of boot flash memory.
1 48-port E/FE/GE with POE (SB)
48 GigabitEthernet/IEEE 802.3 interface(s)
4 Ten GigabitEthernet/IEEE 802.3 interface(s)
FTOS#
Upgrade the bootflash, boot selector, or system image on a processor.
upgrade {bootflash-image | bootselector-image | system-image} {all | linecard
linecard-slot | rpm} {booted | file-url}
bootflash-image
bootselector-image
system-image
all
linecard linecard-slot
rpm
Description
Amount and type of memory on system.
Hardware configuration of the system, including the number and type of
physical interfaces available.
bootflash-image
Enter the keyword
bootselector-image
Enter the keyword
image.
Use with TAC supervision only.
system-image
Enter the keyword
all
Enter the keyword
to upgrade the bootflash/boot selector image on all
processors in the E-Series. This keyword does not upgrade the bootflash on
the standby RPM.
linecard
Enter the keyword
bootflash image on a specific line card.
E-Series Range: 0 to 13 on the E1200; 0 to 6 for the E600; 0 to 5 on the
E300
rpm
Enter the keyword
to upgrade the bootflash/boot selector image on all
processors on the RPM.
to upgrade the bootflash image.
to upgrade the boot selector
to upgrade the cache boot image.
followed by the slot number to change the
Advertisement
