Advertisement
Command
Version 7.8.1.0
History
Version 7.7.1.0
Version 7.6.1.0
redistribute ospf
c e
s
Redistribute OSPF routes into BGP.
t
Syntax
redistribute ospf process-id [[match external {1 | 2}] [match internal]] [route-map
map-name]
To stop redistribution of OSPF routes, use the no redistribute ospf process-id command.
Parameters
process-id
match external
1
{
match internal
route-map
map-name
Defaults
Not configured.
Command Modes
ROUTER BGP Address Family (conf-router_bgp_af)
Usage
When you enter
Information
redistributes all OSPF internal routes, external type 1 routes, and external type 2 routes.
This feature is not supported by an RFC.
Command
Version 7.8.1.0
History
Version 7.7.1.0
Version 7.6.1.0
show ip bgp cluster-list
c e
s
View BGP neighbors in a specific cluster.
t
Syntax
show ip bgp ipv4 multicast cluster-list [cluster-id]
Parameters
cluster-id
Command Modes
EXEC
EXEC Privilege
Introduced support on S-Series
Introduced support on C-Series
Introduced IPv6 MGBP support for E-Series
Enter the number of the OSPF process.
Range: 1 to 65535
(OPTIONAL) Enter the keywords match external to redistribute OSPF external routes.
You can specify 1 or 2 to redistribute those routes only.
2
|
}
(OPTIONAL) Enter the keywords
routes only.
(OPTIONAL) Enter the keywords
Route map.
redistribute ospf
Introduced support on S-Series
Introduced support on C-Series
Introduced IPv6 MGBP support for E-Series
(OPTIONAL) Enter the cluster id in dotted decimal format.
match internal
route-map
process-id command without any other parameters, FTOS
to redistribute OSPF internal
followed by the name of a configured
Border Gateway Protocol IPv4 (BGPv4) | 409
Advertisement
