Advertisement
Parameters
default
system-flow
percentage
l2acl percentage
pvst percentage
qos percentage
l2pt percentage
frrp percentage
Command Modes
CONFIGURATION
Command
Version 7.7.1.0
History
Usage
The PVST sub-partition requires a minimum number of entries when employing PVST+. See the CAM
Information
chapter of the FTOS Configuration Guide for the E-Series.
Related
Commands
show cam-l2acl
show cam-l2acl
e
Display the percentage of the Layer 2 ACL CAM partition that is allocated to each Layer 2 ACL CAM
t
sub-partition. If configuration has changed, the command displays the current configuration and the
configuration that FTOS will write to the CAM after the next chassis reboot.
show cam-l2acl
Syntax
Command Modes
EXEC Privilege
Command
Version 7.7.1.0
History
Enter this keyword to reset the Layer 2 ACL CAM sub-partition space
allocations to the default values (Sysflow: 6, L2ACL: 14, PVST: 50, QoS: 12,
L2PT: 13, FRRP: 5).
Allocate a percentage of the Layer 2 ACL CAM space for system flow
entries. Enter the keyword
Range: 5 to 100
Allocate a percentage of the Layer 2 ACL CAM space for Layer 2 ACL
entries. Enter the keyword
Range: 5 to 95
Allocate a percentage of the Layer 2 ACL CAM space for PVST+ entries.
Enter the keyword
Range: 5 to 95
Allocate a percentage of the Layer 2 ACL CAM space for QoS entries. Enter
qos
the keyword
Range: 5 to 95
Allocate a percentage of the Layer 2 ACL CAM space for L2PT entries. Enter
l2pt
the keyword
Range: 5 to 95
Allocate a percentage of the Layer 2 ACL CAM space for FRRP entries.
Enter the keyword
Range: 5 to 95
Introduced on E-Series
Display the percentage of the Layer 2 ACL CAM partition that is allocated to each Layer
2 ACL CAM sub-partition.
Introduced on E-Series
system-flow
, and specify the percentage.
l2acl
, and specify the percentage.
pvst
and specify the percentage.
, and specify the percentage.
, and specify the percentage.
frrp
, and specify a percentage.
Content Addressable Memory (CAM) | 445
Advertisement
