Dell Force10 TeraScale E Series Reference Manual page 336

Parameters
Command Modes
Usage
Information
Related
Commands
Command
History
debug ip bgp dampening
c e s
Syntax
Parameters
Command Modes
Usage
Information
Related
Commands
336 | Border Gateway Protocol IPv4 (BGPv4)
ip-address
peer-group
peer-group-name
in
out
EXEC Privilege
To view information on both incoming and outgoing routes, do not include the in and out parameters
in the debugging command. The in and out parameters cancel each other; for example, if you enter
debug ip bgp in and then enter debug ip bgp out, you will not see information on the incoming
routes.
Entering a no debug ip bgp
debug ip bgp events
debug ip bgp keepalives
debug ip bgp notifications
debug ip bgp updates
show debugging
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Display information on routes being dampened.
debug ip bgp dampening [in | out]
To disable debugging, enter no debug ip bgp dampening.
in
(OPTIONAL) Enter the keyword
out
(OPTIONAL) Enter the keyword
EXEC Privilege
Enter no debug ip bgp command to remove all configured debug commands for BGP.
show debugging
show ip bgp dampened-paths
Enter the IP address of the neighbor in dotted decimal format.
peer-group
Enter the keyword
(OPTIONAL) Enter the keyword
routes.
(OPTIONAL) Enter the keyword
BGP routes.
command removes all configured debug commands for BGP.
View information about BGP events.
View information about BGP keepalives.
View information about BGP notifications.
View information about BGP updates.
View enabled debugging operations.
in
out
View enabled debugging operations.
View BGP dampened routes.
followed by the name of the peer group.
in
to view only information on inbound BGP
out
to view only information on outbound
to view only inbound dampened routes.
to view only outbound dampened routes.