Advertisement
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
ip msdp redistribute
e
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
932
|
Multicast Source Discovery Protocol (MSDP)
description name
sa-limit number
As above
CONFIGURATION
Version 7.5.1.0
Added option for SA upper limit and description option
Version 6.2.1.1
Introduced
The connect-source option is used to supply a source IP address for the TCP connection. When an
interface is specified using the connect-source option, the primary configured address on the
interface is used.
If the total number of SA messages received from the peer is already larger than the limit when this
command is applied, those SA messages will continue to be accepted. To enforce the limit in such
situation, use command clear ip msdp peer command to reset the peer.
ip msdp sa-limit
clear ip msdp peer
show ip msdp
Filter local PIM SA entries in the SA cache. SAs which are denied by the ACL will time out and not be
refreshed. Until they time out, they will continue to reside in the MSDP SA cache.
ip msdp redistribute [list acl-name]
list acl-name
Enter the name of an extended ACL that contains permitted SAs. If you do not use this
option, all local entries are blocked.
Not configured
CONFIGURATION
Version 7.8.1.0
Introduced
Modifications to the ACL will not have an immediate affect on the sa-cache.
To apply the redistribute filter to entries already present in the SA cache, use clear ip msdp
sa-cache local.
(OPTIONAL) Enter the keyword
(max 80 characters) to designate a description for the MSDP peer.
(OPTIONAL) Enter the maximum number of SA entries in SA-cache.
Range: 1 to 500000
Default: 500000
Configure the MSDP SA Limit
Clear the MSDP peer.
Display the MSDP information
description
followed by a description name
Advertisement
