Dell Force10 TeraScale E Series Reference Manual page 512

Usage
Information
pr-number
c e
Syntax
Parameters
Defaults
Command Mode
Command
History
Related
Commands
recipient
c e
Syntax
Parameters
Defaults
Command Mode
Command
History
Usage
Information
Related
Commands
512 | FTOS Service Agent
After you name the test list with this command, use the command such as default-test to choose the
type of monitoring to perform.
Enter a PR (problem report) number associated with the selected policy. The number is the issue
identifier (bug ID) maintained by Dell Force10.
pr-number number
number Enter a 5-digit PR number, as supplied by Dell Force10.
none
config-callhome-policy-name
Version 7.8.1.0 Introduced on C-Series and E-Series
case-number Specify a case number for the associated policy.
policy Create a policy with a name and enter config-callhome-policy-name mode.
policy-test-list Name a policy test list and enter the config-callhome-actionlist-name mode.
Enter the email address of the recipient associated with the selected server name.
recipient email address
To remove the recipient, use the no recipient email address command.
email address
Enter the recipient's full email address. For example, name@domain_name.com.
ftsa@force10networks.com (associated with the Dell Force10 server only)
CONFIGURATION Server (conf-callhome-server_name)
Version 7.6.1.0 Introduced on C-Series
Version 6.3.1.0 Introduced for E-Series
After using the server command to create a server name, you are placed at that server-specific
prompt, where you can use this command to enter the email address of the recipient that you want to
associate with that server name.
call-home Start FTSA and Enter the FTSA mode.